Universal/EU standard design
CE certification
LCD Display
Low frequency off-grid inverter
Features:
Designed and build with the highest standards
Low frequency off-grid inverter
4 Functions setup, P1: mode adjustment, P2: charge voltage adjustment, P3: charge current adjustment, P4: Buzzer adjustment
3 modes: Main prior mode, Energy saving mode, Solar prior (main not charge)
50Amp Battery Charger Build In 25%/50%/75%/100% select
Very low idle current draw-25W
9000W Surge capacity for 1/2s
Automatically switch from inverter mode to battery charge mode
Low input voltage protection
Short circuit protection
Over temperature protection
Low input voltage protection: (10+/-0.5)
Capable of starting a motor of 1 HP
Sepcifications:
Brand New Pure Sine Wave Inverter DC to AC
Low frequency off-grid inverter
Output Waveform: Pure Sine Wave
Continuous Power: 3000 Watts
Surge Power: 9000 Watts Peak
Frequency: 50HZ
nversion Efficiency: >90%
input DC Voltage: 12V
DC Voltage Range: 9.5V-15.5V
output AC Voltage: 230V
AC Voltage Range: 210V-240V
Low Voltage Alarm: 9.5DC±0.5V
Low Voltage Shut Down: 8.5DC±0.5V
Over Load: Shut Off Output
Over Voltage Shut Down: 15.5V
Over Thermal: Shut Off Output Automatically
Fuses: Short Circuit
Start: Soft Start
Protection: Overload, Short Circuit, Overtemp, Under/Over Voltage
Cooling Fans
Production Condition: Brand New
1 Year Warranty
Size(mm): 420MM *200MM * 200MM
Weight(kgs): 20KG
Package Included:
1 x Inverter
2 x Crimper
1 x Extra Remote
1 x 5m Remote Cable
User Manual
Overview:
The 3000 /9000 Watt Inverter Charger. Features a very low current draw of less than 25 watts on stand by mode. The Inverter Charger also comes with Digital Display, 4 x 230V UK Sockets, as well as a detachable control panel and 5m of cable with an extra remote allowing for remote operation for added convenience.
Solar Ready for, the inverter is able to accept charging from your grid based 230V and pure sine generators, or direct to batteries from your solar panels with the use of a solar controller(Solar controller not inbuilt). Featuring a 40Amp inbuilt charger, with charger selector.
How to check loads: Reactive load items require additional power when they start up. The product's nameplate should list both the operating amps and the maximum amps. When you do not have access to the nameplate for reactive load products, then as a guide, use the rated Amps or Watts multiplied by 3~7 to arrive at the total required at start up. For example-a 200W power tool will need a 1400W inverter, a 60W fridge will need a 420W inverter and so on. It is also recommended to get an inverter with at least 30% more than your needs. states a surge factor of 7x the continuous power should be used for electric motors, water pumps, fridges, air conditioner, and washing machines. A surge factor of 3x should be used for kitchen appliances, halogen and LED lights and other electronics equipment.
If you are not sure about the power, please consult us.
And it is very heavy, maybe need a little long time arrived your hands,
