Charger Base Indicator Light Prevent Slipping Pad Quickly Charging Station for VR Controller

Feature: 1. Fitment For: Charging base is suitable for VR headset, left and right hand controller, efficient and reliable, which is safe and easy to use. 2. Convenient Charge: After replace the rechargeable battery for handheld controller, it can be charged without dismantling, simple and convenient. 3. Display Screen: The front charging stand is the display area, which displays the charging status of the VR device and the left and right controllers. 4. Multi Protection: Charging station with over charge protection, over voltage protection, short circuit protection and other protection functions. 5. Prevent Slipping: Charger base adopted prevent slip cushion design at the bottom, which can ensure that the product fixed more firmly. Specification: Item Type: Charger Base for VR Console Material: ABS Input Interface: TYPE C Interface TYPE C Input: 5V 3A, About 15W Handle End Charging Output: 1.5V 0.5A Host End Charging Output: 5.0V 3A Rechargeable Battery Capacity: 2 x AA Batteries 1.2V 1800mAh (Included) Battery Type: NIMH Rechargeable Battery Standby Current: Less than 100mA I. Product Operation Instructions 1. Connect the supporting power adapter to the TYPE-C port of the charging base through the TYPE-C charging cable, and the green indicator on the product display panel is steady on. 2. Charging operation of the VR host: Insert the magnetic head into the TYPE-C port of the VR host, place the VR body into the host slot of the base at an Angle, and align the magnetic head of the host with the magnetic head of the base to charge. 3.VR left and right grip battery replacement operation: Remove the original battery and battery cover of the left and right grip, and replace them with the corresponding special rechargeable battery and battery cover. The rechargeable battery should be properly installed according to the positive and negative electrode marks on the handle, and in good contact with the two metal sheets of the battery cover. Before it can be used normally. 4. Place the left and right handles in the charging slots of the left and right handles of the charging base, and ensure that the metal pins of the handle battery cover are aligned with the charging pins in the charging slots of the base. Ii. Description of product working status: 1. Put the VR host into the host slot of the base, and the host display icon in the middle of the charging base turns to a steady red indicator light, indicating the charging state of the host; After the host is charged, the display icon of the host turns from a red indicator light to a green indicator light. 2. Put the left and right controllers of the VR into the left and right charging slots of the charging base, and the ICONS of the left and right handles of the charging base turn red, indicating the charging state of the handle. After charging the handle, the handle icon turns from a red indicator light to a green light. 3. Charging time: The dual-handle charging time is about 4-5 hours. It takes about 3-4 hours to charge the VR glasses. 4. After the VR host and controller are removed, the LED indicator turns green. Note: 1. This product can only be used for charging VR headset display and left and right hand controllers. 2. If the red indicator of the handle icon blinks rapidly, the handle is improperly charged. Check whether the handle battery is properly installed and placed, or whether the battery type is correct. 3. If the indicator light of the VR host blinks red quickly, it indicates the fault alarm status. You need to reposition the VR host or plug in the power supply. . Package List: 1 x Charging Base 2 x Rechargeable Battery1 x Left Battery Cover1 x Right Battery Cover1 x Charging Cable 1 x TYPE C Magnetic Suction Head1 x Manual1 x Silicone Pad 1 x Battery Storage Box Note: 1. In order to ensure the normal operation of the product, the new battery must be fully charged for 2?3 cycles before it can achieve the best use effect. Please use the special charging cable, power adapter, rechargeable battery and other accessories that are compatible with this product. Please place the product on the surfaces of the platform and in a ventilated place when using. If you are using a charger with an output of less than 10W, the charging dock will not work properly.2. Please do not store or use the product in a humid or high temperature environment.3. Do not put any metal objects into the charging slot of the controller to avoid short circuit of the charging contact. Otherwise, the product will be damaged.4. Do not knock, break, Pierce, or try to decompose the product to avoid unnecessary damage to the product;5. Do not place the battery on the metal table to avoid short circuit of the positive and negative electrodes. Otherwise, the battery will be damaged.6. If you do not use the product for a long time, please disconnect the power supply of the product.7. If the product is exposed to rain and water. Or damaged, please stop using, timely sent to the professional maintenance department repair. Do not disassemble by yourself.